Zenith Mineral water filling machine strictly follows Chinese National GB/T 21903-2008, that the filling machine needs to meet during the production process, including safety, stability, operability, production efficiency, and other aspects. The detailed measurement and calculation methods for process parameters of the mineral water filling machine, including filling volume, filling time, filling speed, filling accuracy, are introduced. The specific steps and regulations for inspecting the filling machine, including equipment inspection, production inspection, periodic inspection, are also provided. At the same time, the standard also specifies the precautions and maintenance requirements for the use of the filling machine.

 

Filling Mechanism:

This component is specifically designed for atmospheric pressure filling without reflux. All the valves of the entire equipment are installed on the liquid cylinder. During filling, the valves remain stationary while the bottles move up and down in a straight line. During filling, the material enters the filling valve through the liquid inlet and then, after the spring is pushed against the bottle cap placed on the bottle mouth, it is injected into the bottle. This valve adopts a secondary opening valve mechanism. In the non-filling state, the filling valve achieves sealing under the action of the spring. Sealing rings are used at all possible connections with the outside in this component. If any material leakage is found during the production process, please first consider whether the sealing components are damaged.

 

 

 

 

·Welded by SUS304. Product contact is SUS304 food grade, Stainless steel is supplied by POSCO.

·High-efficiency rinsing-nozzles can spray water to any part inside the bottle;

·Corrosion-resistant bearings from NSK or SKF;

·Mechanical valve filling, flow meter filling, weighing filling or laser positioning filling for choice;

·Centralized waste water discharging system;

·Centralized lubricating system;

·ABB main motor for better performance;

·Danfoss VFD system;

·French "ZALKIN" capping technology is used for higher performance;

·Constant capping torque is applied to avoid cap damage.

http://www.zenithpackagingtech.com/